Fujifilm presenta nuovi ottimi firmware per X-T2 e X-Pro2

Ormai lo sappiamo: la cura che Fujifilm riserva ai propri clienti ed alle proprie macchine della serie X è molto elevata. L’azienda ce lo dimostra ancora una volta annunciando i prossimi 2 firmware per le sue attuali top di gamma. Questi seguono la filosofia Kaizen, ovvero del miglioramento continuo e positivo, cosa già ampiamente sperimentata dai possessori dei modelli precedenti, come la X-T1 (recensione). Chi l’ha acquistata nell’ormai lontano 2014, l’ha vista migliorare e guadagnare nuove funzioni con aggiornamenti firmware costanti e non ancora interrotti, dato che l’ultima versione è stata rilasciata appena due giorni fa. Tornando a parlare delle novità per le attuali ammiraglie del sistema X, Fujifilm ha pubblicato un elenco di 33 punti con migliorie a tutto tondo, volte a pareggiare alcune funzioni fra le due macchine oppure a migliorare specifici aspetti della X-T2 (recensione). Di seguito il changelog (in inglese) di ciò che è stato promesso, seppur diviso in due rilasci, uno a marzo ed uno alla fine di maggio:

X-T2 version 2.00 & X-Pro2 version 3.00 – due late March 2017

  1. Shooting RAW in Bracketing and Advanced Filters
    The update enables you to use the RAW format when shooting not only in AE Bracketing but also in other Bracketing modes (ISO, Dynamic Range, White Balance, Film Simulaitons) and also in Advanced Filter modes.
  2. Extended ISO 125 and 160 selectable
    The update adds ISO125 and ISO160 to extended ISO levels available.
  3. Programmable long exposure of up to 15 minutes
    Long exposure in the T mode currently goes only up to 30 seconds. The update will allow users to extend it up to 15 minutes.
  4. ON/OFF for 1/3-step shutter speed adjustment (X-T2 only – already in X-Pro2)
    The update allows you to turn off the Command Dial’s function to adjust shutter speed by 1/3 steps in order to prevent unintended adjustments.
  5. Full-range ISO adjustments with the Command Dial (X-T2 only)
    With the update, set the ISO “A” position to “Command” to adjust ISO sensitivity across the full range, including extended ISOs, with the Front Command Dial.
  6. AUTO” setting added for the minimum shutter speed in the ISO Auto setting
    The update adds an AUTO option for the minimum shutter speed in the ISO Auto setting, that allows the camera to automatically define the minimum shutter speed according to the focal length of the lens attached.
  7. Faster “Face Detection AF”
    The update enables the use of Phase Detection AF for faster performance in Face Detection AF.
  8. Improved in-focus indication in the AF-C mode
    The update reduces focus hunting in the AF-C mode, making it easier to track a subject.
  9. Addition of a smaller Focus Point size in Single Point AF
    The update adds a smaller Focus Point size in Single Point AF, bringing the total number of available sizes to six. The new smallest size facilitates pin-point focusing.
  10. Addition of “AF Point Display” (X-Pro2 only – already on X-T2)
    With the update, you can choose to have AF Points constantly displayed in Zone AF and Wide / Tracking AF, making it easier to track a subject.
  11. Addition of “AF-C Custom Setting” (X-Pro2 only – already on X-T2)
    The update adds “AF-C Custom Setting” for specifying focus-tracking characteristics. Choose from five presets according to your subject’s type of movements.
  12. Addition of “Portrait / Landscape AF Mode Switching” (X-T2 only)
    The update allows you to specify separate AF mode and AF point settings for portrait orientation and landscape orientation.
  13. Change of focus frame position while enlarging it
    The update allows you to move the position of focus frame while enlarging it in Single Point in the AF-S mode or in the Manual Focus
  14. Activation of the Eye Sensor in video recording (X-T2 only)
    The update allows you to use the Eye Sensor during video recording to automatically switch between EVF and LCD.
  15. Change of ISO sensitivity during video recording (X-T2 only)
    The update allows you to change ISO setting during video recording.
  16. Re-autofocusing in video recording
    With the update, half-press the Shutter Release button or press the button assigned to “AF-ON” function during video recording to re-do autofocusing.
  17. Display live histogram during video recording (X-T2 only)
    The update allows you to display a live histogram during video recording.
  18. Optimization of external microphone’s input level (X-T2 only)
    The update optimizes external microphone’s input level (lower limit revised from -12dB to 20dB) to reduce white noise when an external microphone with preamp is connected.
  19. Addition of “Eye Sensor + LCD Image Display” in the View Mode
    The update gives the “Eye Sensor + LCD Image Display” option in the View Mode that allows you to shoot through the viewfinder and check images on the LCD, just as you would with an SLR.
  20. Shorter EVF display time-lag (X-Pro2 only – already in X-T2)
    The update shortens EVF’s display time-lag in the AF-C mode so that you will not miss a photo opportunity.
  21. Constant “Dual” mode display (X-T2 only)
    With the update, the small window in the Dual mode stays on even when you half-press the shutter release button.
  22. Automatic vertical GUI for LCD (X-T2 only)
    With the update, when you hold the camera in the portrait orientation, the camera will automatically display the GUI on the LCD in the same orientation.
  23. Name Custom Settings
    The update allows you to assign a specific name to Custom Settings 1 – 7.
  24. Copyright information in EXIF data
    The update allows you to register the photographer’s name and the copyright holder’s name in advance so that the camera automatically adds the information to EXIF data for each image.
  25. Voice Memo function
    The update enable you to record 30-second “Voice Memo” clips in the Playback mode.
  26. Extended AE Bracketing
    The update extends AE Bracketing from the current 3 frames +/-2EV to up to 9 frames +/-3EV.
  27. Addition of “Shoot Without Card” mode
    With the update, you can have the “Shoot Without Card” mode turned OFF so that the camera can not shoot when there is no SD card inserted.

X-T2 version 2.10 & X-Pro2 version 3.10 – late May 2017

  1. Support for computer tethering via Wi-Fi (X-T2 only)
    The update adds support for computer tethering via Wi-Fi.
  2. Addition of “All” AF mode (X-T2 only)
    With the update, select “All” in the AF mode so that you can select the AF mode and Focus Area size by only using the Command Dial.
  3. Function extension for “Shutter AF” and “Shutter AE” (X-T2 only)
    With the update, you can specify different settings for AF-S and AF-C in “Shutter AF” and for AF-S / MF and AF-C in “Shutter AE.”
  4. Addition of “-6” and “-7” to EVF’s brightness setting
    Additional options of “-6” and “-7” to the “EVF Brightness” setting so that, even in an extremely low-light condition, the brightness of the EVF does not distract you from shooting.
  5. Switchover of the main and sub displays in the Dual Display mode (X-T2 only)
    The update allows you to switch between the main and sub displays in the Dual Display mode.
  6. Function assignment to the Rear Command Dial
    With the update, you can assign a specific function to be activated when the Rear Command Dial is pressed.

Volevo inoltre condividere con voi alcune mie considerazioni alla luce di questa lista di cambiamenti, soffermandomi su quelli che mi hanno più colpito.

1) Al punto 1 si parla di scattare in RAW con filtri avanzati e sono curioso di capire come questa cosa verrà gestita.
3) Lunghe esposizioni programmabili fino a 15 minuti saranno sicuramente molto utili.
7) Avevo lamentato una certa reticenza nel riconoscere i volti quando ho parlato della X-Pro2 (recensione) sarà interessante capire quanto sarà migliorata questa funzione.
8) Con la X-T2 il tracking era molto efficiente, averlo migliorato ulteriormente significa avvicinarsi ai livelli delle reflex di fascia alta.
10 e 11) La X-Pro2 non aveva delle funzionalità di autofocus continuo molto sviluppate, con questo update andranno ad avvicinarsi a quelle della X-T2
12) La selezione del punto AF diverso a seconda dell’orientamento della fotocamera è una funzione che amo della mia EOS 5D Mark III e che sono felice venga replicata (e migliorata) nella X-T2
14 fino a 18) Sono tutte funzioni aggiuntive e miglioramenti che gioveranno alla ergonomicità nell’uso video della X-T2
19) Simpatica opzione per chi è abituato a scattare con il mirino e controllare il risultato sul display (stile reflex)
22) Questa la ritengo una cosa utilissima e non so se sia presente su altre macchine. In pratica utilizzando la macchina in modalità portrait avremo anche il menù orientato in quel verso, utile sopratutto nelle sessioni di ritratto in studio, fantastico abbinato al display ribaltabile.
24) Era ora! forse abituato a questa funzione presente sulle Canon da tempo immemore, mi sembrava strano non ci fosse la possibilità di inserire il proprio copyright nei dati EXIF.
28) Mi incuriosisce la possibilità dello scatto tethering via Wi-Fi, effettivamente scattare in studio con il cavo USB collegato non è il massimo della comodità, sopratutto se non si scatta con il cavalletto.

Per i temerari che fossero riusciti a leggere anche i miei commenti concludo dicendo che il primo firmware sarà rilasciato fra pochi giorni, probabilmente il 30 marzo, e che il secondo firmware vedrà la luce verso la fine di maggio, sempre se non sorgono problemi e bug dell’ultima ora.

Massimiliano Latella

Guest Editor - Fotografo matrimonialista, suono il Basso e la tecnologia è il mio leitmotiv.

Commenti controllati Oltre a richiedere rispetto ed educazione, vi ricordiamo che tutti i commenti con un link entrano in coda di moderazione e possono passare diverse ore prima che un admin li attivi. Anche i punti senza uno spazio dopo possono essere considerati link causando lo stesso problema.